Erosion Tables

	Slope Application Overlay the sides snugly together (overlapping max 2") if possible extend 3½ feet over the crest
	Ditch Line Application Roll out mat with the flow. Overlap the ends by 3" in the flow direction and anchor with a common row of staples not more than 1 1/2 feet apart. On wide ditches, overlapping of mat joints should not be in center of ditch.
	Stapling Procedures At the ends anchor with a row of staples not more than 1 ½ feet apart. Staple or wooden stakes on 3 foot centers.
	Earth Lock Closed Check Slot
	Earth Lock Downstream Terminals

High Velocity Straw Blanket
Width:	7½’ (2.3m)
Weight:	55 lb., 24.9 kgs (± 10%)
Length:	120’ approx
Area:	100 sq. yds (83.6 sq. m.)
Usage:	Heavy soils such as clay, loam, and even sandy clay loam it will withstand water flow rates up to 11.0 fps; on sandy soils flow rates up to 8.6 fps.

back

Standard Excelsior Blanket
Width:	7½’ (2.3m)
Weight:	85 lb., 38.6 kgs (± 10%)
Length:	120’ approx
Area:	100 sq. yds (83.6 sq. m.)
Usage:	Slopes 3:1 - 2:1, Channels to 5 fps, Heavy soils such as clay, loam, and even sandy clay loam it will withstand water flow rates up to 4.8 fps; on sandy soils flow rates up to 3.9 fps.

back

Green Standard Excelsior Blanket
Width:	4’ or 8’
Weight:	78 lb., kgs (± 10%)
Length:	180’ and 90’
Area:	80 sq. yds (sq. m.)
Usage:	Slopes 3:1 - 2:1, Channels to 5 fps, Heavy soils such as clay, loam, and even sandy clay loam it will withstand water flow rates up to 4.8 fps; on sandy soils flow rates up to 3.9 fps.

back

High Impact Excelsior Blanket
Width:	7½’ (2.3m)
Weight:	80 lb., 36.3 kgs (± 10%)
Length:	60’ approx
Area:	50 sq. yds (41.8 sq. m.)
Usage:	Slopes 2:1 -1:1, Channels to 7 fps, Heavy soils such as clay, loam, and even sandy clay loam it will withstand water flow rates up to 11.0 fps; on sandy soils flow rates up to 8.6 fps.

back

Heavy High Impact Excelsior Blanket
Width:	7½’ (2.3m)
Weight:	80 lb., 36.3 kgs (± 10%)
Length:	96’ approx
Area:	80 sq. yds (66.9 sq. m.)
Usage:	Slopes1-1 / 2:1, Channels - High flow, Heavy soils such as clay, loam, and even sandy clay loam it will withstand water flow rates up to 11.0 fps; on sandy soils flow rates up to 8.6 fps.

back

Second Nature®
Properties:
Percent moisture (maximum)	-
Percent ash content	1.0% +0.2% O.D. Basis
pH	5.5 ±1
Water holding capacity (grams of water per 100 grams of fiber)	1200
Package	50 lb. plastic bags
Application Rates:
Flat	1800 lb. per acre
Slope 3:1 or less	2500 lb. per acre

back

Dr. Grow Paper Fiber Hydroseeding Mulch
Properties:
Percent moisture (maximum)	-
Percent ash content	1.0% +0.2% O.D. Basis
pH	5.5 ±1
Water holding capacity (grams of water per 100 grams of fiber)	1200
Package	50 lb. plastic bags
Application Rates:
Flat	1800 lb. per acre
Slope 3:1 or less	2500 lb. per acre

back

Spray Matt™
Properties:
Percent moisture (maximum)	12% (±3%)
Percent ash content	1.0% +0.2% O.D. Basis
pH	6.5 (±1)
Water holding capacity (grams of water per 100 grams of fiber)	1100
Package	50 lb. plastic bags
Application Rates:	-
All applications	3000 lbs. per acre
Slope 2:1 or less: Do not apply as a thick coat; allow product to rain down on surface and repeat with a minimum of two coats. Applying product to flat surface on top	2500 lb. per acre

back

Wood Fiber Content	50% ± 10%
Clean, recycled paper	50% ± 10%
Moisture Content (total weight base)	12% ± 3%
Organic matter (min.)	97%
Inorganic (ash) content (max.)	3%
pH at 3% consistency in water slurry (avg.)	5.7
Water holding capacity (min.)	1.2 gal./lb.
Packaged in 50lb./22.6kg. multi-wall kraft bags Bag dimensions: 35 x 18 x 8½" Available in palletized 18-bag units Product certification and MSDS available upon request
Where to use Mat-Blend 50/50®: Lawn and turf applications, little-to-no slope; where a tight fiber weave helps germination.

back

Moisture content (total weight basis)	12% ± 3%
Organic matter (oven-dried weight basis, min.)	99.3%
Inorganic (ash) content (oven-dried weight basis, max.)	0.7%
pH at 3% consistency in water slurry (avg.)	4.9
Water-holding capacity (min.)	1.2 gal./lb.
Packaged in 50lb./22.6kg. multi-wall kraft bags Bag dimensions: 35 x 18 x 8½" Available in palletized 18-bag units Product certification and MSDS available upon request
Where to use Mat-Fiber: Lawn and fine turf applications; Erosion control on slopes 4:1 or flatter; Worldwide application.

back

Moisture content (total weight basis)	12% ± 3%
Organic matter (oven-dried weight basis, min.)	99%
Inorganic (ash) content (oven-dried weight basis, max.)	1.0%
pH at 3% consistency in water slurry (avg.)	4.7
Water-holding capacity (min.)	1.2 gal./lb.
Tackifier content (by weight basis)	3%
Packaged in 50lb./22.6kg. multi-wall kraft bags Bag dimensions: 35 x 18 x 8.5" Available in palletized 18-bag units Product certification and MSDS available upon request
Where to use Mat-Fiber Plus: Fine lawn and turf establishment on slopes; Where mulch performance is critical; Erosion control on slopes of 2:5:1 or flatter.

back

Corn fiber content	100%
Moisture content (total weight base)	12% ± 3%
Organic matter (min.)	93%
Inorganic matter (ash) (max.)	7%
pH at 3% consistency in water slurry (avg.)	7.0
Water-holding capacity (min.)	1.2 gal./lb.
Packaged in 50lb./22.6kg. multi-wall kraft bags Bag dimensions: 35 x 18 x 8.5" Available in palletized 18-bag units Product certification and MSDS available upon request
Where to use Ameri-Fibers: Lawn and turf applications, little-to-no slope; Where a tight fiber weave helps germination; Anywhere East of the Rockies.

back

Earth Bond
Application Rates:
Slopes 2:1 or less:	3 lb. acre
Slopes 2:1 or more:	3 to 6 lb. acre *
* Soil Stabilization:	Not Recommended
Lubricant:	2 oz per 100 lb. mulch

back

Tac Pac
Application Rates:
Slopes 2:1 or less:	20 lb. acre
Slopes 2:1 or more:	40 lb. acre *
* Soil Stabilization:	40 to 80 lb. acre
Lubricant:	1 lb. per 100 lb. mulch

Available in box’s of 4 10 lb. bags
back

Return to Erosion Page

Return Home